MINTOR 1.70

[Wayne Galligan]

I'm sure you guys have seen Inchenol Parks posts here on the list.  He is importing them and they are priced very reasonable.   C.F. with aluminum insert at inlet. and weights 115 grams(4oz).   $105 shipped.  

http://www.geocities.com/beaton90/index.html
  ----- Original Message ----- 
  From: GW 
  To: discussion at nsrca.org 
  Sent: Monday, August 11, 2003 10:52 AM
  Subject: Re: Mintor 1.70


  what is a Bluebird Carbon Pipe?  Never heard of that one.


  GW
  Gerald Williams
  Email : gw at gwair.com
  Webpage: www.gwair.com

    ----- Original Message ----- 
    From: Wayne Galligan 
    To: discussion at nsrca.org 
    Sent: Monday, August 11, 2003 10:27 AM
    Subject: Mintor 1.70


    Just a few notes on my initial test and break-in on this engine.  It has not been installed in my plane as of this writing but I cant wait.

    3M 1.70 stock header
    10 % Magnum fuel
    Bluebird c.f. 2-stroke pipe  24.25" center of head to 1st baffle.  Total length of exhaust center of head to end of pipe  31.5"

    Test day 98 degrees and about 35%+ humidity

    17x12N APC      high 8500rpm low 1600rpm
    17x13 std APC   high 8250rpm  low 1500rpm 

    This is after 5) 16oz tanks of breakin.  I broke it in just like the OS,  alternating rich to lean during first several tanks.

    Wayne Galligan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030811/bcc4238a/attachment.html