Poland - electric

[Mike McConville]

I dont believe Jason has the prop stopping in stall turns or downlines. That
video was a test flight, and no set-up had been dialed in yet.
Seems to be the downlines would be one of the big advantaged of ep, as you
could dial the motor RPM to whatever is optimum for breaking. A lot of cool
stuff happening!

m

-----Original Message-----
From: randy10926 at comcast.net [mailto:randy10926 at comcast.net]
Sent: Thursday, August 07, 2003 9:22 AM
To: discussion at nsrca.org
Subject: Re: Poland - electric


Watched the videos.  Man they are great.  Anyone know what a set-up like the

one Jason is using costs and where to get the parts.  That power without
having 
to clean up after each flight and the end of the day.

Randy
> Now that is power management!
> ----- Original Message ----- 
> From: "Henderson,Eric" <Eric.Henderson at gartner.com>
> To: <discussion at nsrca.org>
> Sent: Wednesday, August 06, 2003 10:08 PM
> Subject: RE: Poland - electric
> 
> 
> Did you notice the prop stopping in stall turns and down lines Hmmm???
> 
> -----Original Message-----
> From: discussion-request at nsrca.org
> [mailto:discussion-request at nsrca.org]On Behalf Of William C. Harden
> Sent: Wednesday, August 06, 2003 7:17 PM
> To: discussion at nsrca.org
> Subject: RE: Poland - electric
> 
> 
> I have watched the video and I am impressed.  Electric airplanes have
> come along way in the past decade.  
> 
> Bill Harden
> 
> 
> 
> -----Original Message-----
> From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
> On Behalf Of Tony Stillman
> Sent: Wednesday, August 06, 2003 3:11 PM
> To: discussion at nsrca.org
> Subject: Re: Poland - electric
> 
> Guys:
> 
> I'm struggling with a 28.8K connection in Poland, but I'll try to update
> my

> website with info each day.  (www.radiosouthrc.com)
> 
> Don't worry about Jason.  He is flying, IMHO, the best of the three
> right
> now!  Don't get me wrong, Sean and Chip are GREAT also, but, I think
> Jason
> is concentrating a little more at this stage.  Perhaps it's all the
> people
> that just suddenly go silent, jaw dropping to the ground, when Jason
> takes
> off, and goes into a rolling circle on takeoff, then BLOWS vertical on
> the
> square loop starter!  He is the TALK of the WC, right now!
> 
> Tony
> ----- Original Message ----- 
> From: "Mike McConville" <mmcconville at horizonhobby.com>
> To: <discussion at nsrca.org>
> Sent: Wednesday, August 06, 2003 2:56 PM
> Subject: RE: Poland - electric
> 
> 
> > Hi Guys,
> >
> > Been following this thread and I found this video of Jason's airplane
> if
> > your interested:
> >
> > http://www.rccraze.com/hackervideos.html
> >
> > Open it and go down 6 models on the left hand side. That's the maiden
> flight
> > of Jason's airplane, though he isn't flying it there.
> >

> > IMHO, this is an extraordinary achievement and I applaud Jason for his
> > effort in making this work. I'm sure the novelty factor along with
> Jason's
> > thumbs will make for an excellent showing in Poland.
> >
> > m
> >
> >
> >
> > -----Original Message-----
> > From: John Ferrell [mailto:johnferrell at earthlink.net]
> > Sent: Wednesday, August 06, 2003 12:47 PM
> > To: discussion at nsrca.org
> > Subject: Re: Poland - electric
> >
> >
> > Jason won the selection process. There is always risk with a new
> technology,
> > like Chip's engine. But if the technology is percieved superior, this
> is
> the
> > best place and time.
> >
> > We have been waiting for a very long time for this!
> >
> > ----- Original Message ----- 
> > From: <juhler at bellsouth.net>
> > To: <discussion at nsrca.org>
> > Sent: Tuesday, August 05, 2003 2:15 PM
> > Subject: re: Poland - electric
> >
> >
> > > I agree to a point that it should be up to the individual on what
> > equipment they use.  However, keep in mind that the way they made the
> team

> > in the first place was there performance at one contest.  They are
> placed
> on
> > the team because of the equipment they used at that contest.  If they
> make
> > the team for the sole purpose of a personal agenda, ie. switching to a
> > sponsors prototype for the purpose of showing the world, then no I
> don't
> > agree it is up to them.  They beat out other very qualified people by
> using
> > proven methods.  If their agenda is to show the world this new
> technology,
> > then use it to beat the competition to get there.
> > >
> > > Just my thoughts.
> > >
> > > Jon
> > >
> > > =====================================
> > > # To be removed from this list, send a message to
> > > # discussion-request at nsrca.org
> > > # and put leave discussion on the first line of the body.
> > > #
> > >
> >
> > =====================================
> > # To be removed from this list, send a message to
> > # discussion-request at nsrca.org
> > # and put leave discussion on the first line of the body.
> > #
> > =====================================

> > # To be removed from this list, send a message to
> > # discussion-request at nsrca.org
> > # and put leave discussion on the first line of the body.
> > #
> >
> >
> 
> 
> =====================================
> # To be removed from this list, send a message to 
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
> 
> 
> =====================================
> # To be removed from this list, send a message to 
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
> 
> ============# To be removed from this list, send a message to 
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
> 
> =====================================
> # To be removed from this list, send a message to 
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
> 

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#
=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#