S.S.Bearing

[mdarr00 at comcast.net]

    Dave, I was unaware of the differance in size, but I know for a fact that Verne Koester is running one in his O.S. 140 RX, and I got that p/n off of his spare bearing package.  What was the differance in the bearing size?  If it is slightly wider or narrower, it will most likely not make a differance, as long as the i.d. and o.d. is the same size.  Maybe Verne will chime in on this thread and let us know for sure.

Mike
  ----- Original Message ----- 
  From: Dave Smith 
  To: discussion at nsrca.org 
  Sent: Monday, August 04, 2003 5:29 PM
  Subject: S.S.Bearing


  "  learned from other peoples experience that the best stainless steel bearing
  is the O.S. FI factory bearing p/n 29430010.  That is the bearing I will be
  using next, and I was told to leave the seals in the bearing to maintain the
  factory grease in the bearing."


  Mike:     On checking with Tower,the stainless bearing will not be available until October.

  Also,their specs show it to be very slightly different in size than the one they list for the 140RX.    Would this be a problem?

  Dave
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030804/4e6b256c/attachment.html