t-plate for bilnds nuts

[Wayne Galligan]

Eddie, 

The spinner will be centered by the nosering.  If you change thrust the spinner back plate may not be square to the nose.  But you making a change in the thrust line...not the squareness of you spinner to the fuse.

WG

  ----- Original Message ----- 
  From: W. Eddie Batchelor 
  To: discussion at nsrca.org 
  Sent: Friday, August 01, 2003 5:25 PM
  Subject: Re: t-plate for bilnds nuts 


  Wayne
  If I'm comprehending what you're saying, then couldn't I over drill the holes thru the firewall and thus be able to slide the t-plate(behind firewall) - motor mount(in front of firewall)  unit around on the firewall.

  This would help to re-center the spinner when adding right thrust.

  Eddie
    ----- Original Message ----- 
    From: Wayne Galligan 
    To: discussion at nsrca.org 
    Sent: Friday, August 01, 2003 5:03 PM
    Subject: t-plate for bilnds nuts 


     use a piece of lite ply and set the mount on it and drill through the mount holes into the plate.  Then set the 4-40 blind nuts in this plate and glue the nuts with thin c/a.  The t-plate goes on the back side of the firewall.  

    Wayne
      ----- Original Message ----- 
      From: Ihncheol Park 
      To: discussion at nsrca.org 
      Sent: Friday, August 01, 2003 4:48 PM
      Subject: RE: loctite


      Wayne,

      What do you mean by T-plate?
      Would you explain how to?

      Thanks,

      Ihncheol Park
        -----Original Message-----
        From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]On Behalf Of Wayne Galligan
        Sent: Friday, August 01, 2003 2:35 PM
        To: discussion at nsrca.org
        Subject: loctite


        Something I have done on all my planes is to make a t-plate and put the blind nuts in this.  Thus making a sort of clamp.  Cant miss with this and as the blind nuts are c/a'd to the plate they shouldn't come loose, at lease I haven't had one come loose on me.  Then if you need to make thrust changes you can drill out the holes larger in the firewall and will be able to move the mount around some. 
        Ken  your right on the blue Loctite and it actually will stay on the nut/bolt and will sort of reseal again without having to reapply(just in case your out of Loctite).

        Wayne G
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030801/bbfb08cc/attachment.html