Advanced sequence ?

[Woodward James R Civ 412 TW/DRP (Test Ops)]

http://modelaircraft.org/templates/ama/PDF-files/Rulebook/rc-aero2002.PDF
<http://modelaircraft.org/templates/ama/PDF-files/Rulebook/rc-aero2002.PDF> 

 

Also, I'd add follow this link and read the maneuver descriptions.  It is
more than good reading if it has been a while......

 

Jim W.

 

 

It is a 2 1/2 turn spin, push to horizontal, then half roll to upright.

 

----- Original Message ----- 

From: Tomanek, <mailto:tomanekw at saic-abingdon.com>  Wojtek 

To: 'discussion at nsrca.org' <mailto:'discussion at nsrca.org'>  

Sent: Wednesday, April 23, 2003 2:22 PM

Subject: RE: Advanced sequence ?

 

Wow, that is a diffrent interpretation of how I have been flying it. On the
NSRCA call sheet the manuever is described as " 2 1/2 turn spin with a half
roll out". Silly me I have been practicing a 2 1/2 turn spin with an
established downline then half roll in the downline followed by more
downline (hope I started real high) then an upright exit. Am I to understand
that the actual manuever is "2 1/2 turn spin exit inverted half roll out" to
landing? 

Does there exist a set of drawings for these manuevers somewhere? My old AMA
rule book does not have them.

"Tomanek, Wojtek" <tomanekw at saic-abingdon.com> wrote:

I believe that it does not matter, when coming out of the spin you  need to
pause going down, then level the plane (90 deg) to a horizontal flight, then
pause (straight inverted flight)  and then roll.  The pause shall not be
larger than the radius of the downline to horizontal transition but it has
to be there unlike in the Immelman 

"2 1/2 turn spin exit inverted half roll out" to landing?" = correct, but
better announce that landing

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030423/877069d8/attachment.html