Tuned Pipe Couplers

[Reeves]

Hi Tony, Is your shop open today? I need to order some couplers. I tried the 800 number but no answer. Thanks,  Reeves.
  ----- Original Message ----- 
  From: Tony Stillman 
  To: discussion at nsrca.org 
  Sent: Monday, April 21, 2003 11:11 AM
  Subject: Re: Tuned Pipe Couplers


  Wojtek:

  These are actually made by MPP.  I still have a few of them left.

    ----- Original Message ----- 
    From: Tomanek, Wojtek 
    To: 'discussion at nsrca.org' 
    Sent: Monday, April 21, 2003 9:03 AM
    Subject: RE: Tuned Pipe Couplers


    There used to be an aluminum coupler with two "O" rings and a separate aluminum ring/collar with a set screw made for Central Hobbies.  You would set the collar on the header and then slide the coupler to touch the collar and push the pipe neck tight and then attach the pipe.  Worked great and it was very light.  I am not sure if they still carry this.  

     

    WKT

      

     

    -----Original Message-----
    From: Reeves [mailto:reeves at mtaonline.net]
    Sent: Monday, April 21, 2003 1:59 AM
    To: discussion at nsrca.org
    Subject: Tuned Pipe Couplers

     

    Hi, On a plane with a one piece wing what kind of coupler set up are you using so you can easily disconnect the pipe to remove the wing? I am using a 1/2" Chris Dalby Header and Prosser pipe. Thanks, Reeves in Alaska.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030421/ee9b27ac/attachment.html