teflon tubing - what type to use?

[Gene Maurice]

You want the PTFE, 1/16 wall. This stuff is pretty stiff when its cold, but
the thin wall stuff won't handle the heat. It will strech a little from the
stated ID if you heat it up.

Gene Maurice
gene.maurice at attbi.com
Plano, TX
AMA 3408
NSRCA 877

-----Original Message-----
From: discussion-request at nsrca.org
[mailto:discussion-request at nsrca.org]On Behalf Of Dennis O'Keefe
Sent: Saturday, April 19, 2003 7:47 PM
To: discussion at nsrca.org
Subject: teflon tubing - what type to use?


Can anyone answer this question?

Hey Guys,
I looked at the Mcmaster-Carr site ( http://www.mcmaster.com/ ) did a search
for teflon tubing and on catalog pages 93-95 found the following types of
Teflon tubing:  Fluropolymers, Teflon, ETFE, PTFE, PFA, FEP, PVDF.  Which
kinds do we use for header to canister connection? Header to pipe on 4
strokes?

Any you smart guys know which one?




=====================================
# To be removed from this list, send a message to
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#



=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#