DZ flying time

[JOddino]

Yeah, I don't think the Mejzlic is really 22 inches and it has a pretty
small blade, but it does hall a 15 pound plane around with no problem.
Jim
----- Original Message -----
From: "Tomanek, Wojtek" <tomanekw at saic-abingdon.com>
To: <discussion at nsrca.org>
Sent: Friday, April 18, 2003 8:53 AM
Subject: RE: DZ flying time


> 35.5 lb of thrust
> 6.2 HP (although it is only rated at max output of 5 HP) <LOL>
>
>
>
>  -----Original Message-----
> From: JOddino [mailto:JOddino at socal.rr.com]
> Sent: Friday, April 18, 2003 12:11 AM
> To: discussion at nsrca.org
> Subject: Re: DZ flying time
>
> I believe I can fly for 30 minutes on my 24 oz. tank although I've never
> stayed up that long.  That is with a 22x10 prop that turns about 7200 at
> WOT.  Put those numbers in your static thrust calculator.  Pattern needs
to
> liberalize the rules so you can use engines like my DA 50.
> Just trying to stir up a little controversy.
> Jim
> ----- Original Message -----
> From: "Ed Deaver" <divesplat1 at msn.com>
> To: <discussion at nsrca.org>
> Sent: Thursday, April 17, 2003 8:48 PM
> Subject: DZ flying time
>
>
> > Am looking for some ideas on fuel conservatism for the DZ.
> >
> > In the Oly Medal, 24oz Dubro tank with YS foam clunk, needle at 1.25
> turns,
> > Prop APC 16.5X12W running 8400RPM(using ATV to turn down from 9100rpm).
> >
> > I get through the masters sequence, using more throttle management than
> > ever, for me, with one extra pass at times before the first burble, this
> is
> > prior to 7.5 minutes.
> >
> > Any thoughts on getting more flying time?  I am about ready to go to a
> > hopper tank but want to exhaust my options before this.
> >
> > Thanx in advance.
> >
> > ed
> >
> >
> >
> >
> >
> >
> >
> >
> > _________________________________________________________________
> > Protect your PC - get McAfee.com VirusScan Online
> > http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
> >
> > =====================================
> > # To be removed from this list, send a message to
> > # discussion-request at nsrca.org
> > # and put leave discussion on the first line of the body.
> > #
> >
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#