Webra 145

[jim ivey]

Hey guys
I know there was a dicussion about the webra etc. I deleted it and I need 
some info about the webra setup now.
I have the top end at 8000 rpm, the low end will idle at 1800,but as soon as 
the throttle is raised the eng tries to die,like it is lean. I have richened 
it to the point that it will take throttle now,however in negative (G) 
inverted and a push to verticle it sags. It is better since I richened low 
end. I was running 15% cool power.My experience says that nitro will solve 
some low end problems so I tried 20%Pro- Pattern(cool Power). This made 
things better,but it still tries to sag on a hard push to verticle as in the 
humpty-bump 1/2 roll dn full roll up.
I think I need more fuel delivery and reneedle everything. The question 
is..What does the adjustment do on the backplate. Is it a pump pressure adj 
or a regulator similar to YS. I,m thinking it is a pressure adj and I need 
more pressure.Which way increases pressure CCW or CW as view from the rear. 
All comments welcome, TIA.

Jim Ivey


_________________________________________________________________
MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*.  
http://join.msn.com/?page=features/virus

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#