Rudder Turbulator Strips

[Ron Lockhart]

Hi Wojtek,

Not "turbulator strips" as such, but:
I saw a rudder on an Austrailian 2 meter bird at the 
NATS years ago with a very thick trailing edge.  
The pilot (I don't recall his name) said it provided
better response at low speed- such as stall turns.
I suppose you could tape a triangle about 1/2" wide,
1/8" thick to each side of rudder to create a 
trailing edge about 1/4 to 3/8" thick to try it.
If you do, let us know results.

Later, Ron Lockhart

----- Original Message -----
From: "Tomanek, Wojtek" <tomanekw at saic-abingdon.com>
Date: Tuesday, April 15, 2003 9:20 am
Subject: Rudder Turbulator Strips

> On the IMAC list there was some discussion about using turbulator 
> strips on
> both sides of the rudder's trailing edge.  Actually, I do remember 
> seeingsome on large IMAC planes.  I was wondering if any one tried 
> this on a 2M
> plane and what were the results??
> 
> TIA
> Wojtek


=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#