Fw: Re: Planes for sale

[Terry Terrenoire]

I sent this note out last fall, but since most of you were probably fill
with the confidence that you would have a project ready, there was little
response. If reality has set in, and you do need a new mount. Dorp me a
note.

> I am posting this for a friend. He has been very busy building for the
> past few years and has accumulated a rather large inventory of good
> pattern ships.
>
> All of the planes include retracts, retract servos, tank, plumbing, and
> fuel dots.
> All are finished with PPG Concept painted fuselages, Monokoted wings
and
> tails.
> All have removeable stabs.
>
> Hanson Elite, with YS 91...............$750
> Hanson Elan..................................$750
>       The Elan has a one piece, that plugs together!
> Nomex Sequel ..............................$600
>       The Sequel is a repaired crash victim. Jig repaired---straight
and
> RTF.
> Summit 120, with YS 120AC.........$1500
>        Built by Bob Noll for his own competition flying. The engine is
0
> time factory rebuild .
> Finesse, with YS 120 FZ...............$1500
>        From the original Goldberg kit, good flyer.
>
> Please E-mail me directly for further information. Or call!
>
> Terry T.
> 607-748-8146
=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#