Sheeting the Wings>>>Contact cement

[Tony Stillman]

I used to make the "Deluxe" kits for Southern R/C Products, and we used
Sorgum contact cement for them.  I sprayed the adhesive on the wing skins
and cores and then covered the wings.  We could do about 100 sets of wings
in a day!

This was the common way of doing things in the 1970's.  Later, we went to
epoxy, as the wing was more rigid.  The adhesive would tend to release in
places in the 100 degree heat over time!

Tony Stillman
Radio South, Inc.
3702 N. Pace Blvd.
Pensacola, Fl 32505
www.radiosouthrc.com
800-962-7802
----- Original Message -----
From: "Larry Ott" <lott at brown-strauss.com>
To: <discussion at nsrca.org>
Sent: Monday, September 09, 2002 4:08 PM
Subject: RE: Sheeting the Wings>>>Contact cement


> To all,
>
> While contact cement may not be the best way to sheet wings
> today, it used to be an acceptable method. Back in the 70's
> and 80's all my foam pattern wings were sheeted with contact
> cement, 3M 77 if memory serves. I still have one plane, a
> Tippo, that is over 20 years old and it is has not re-kitted
> itself because the sheeting flew off <g>. Yet! <vbg>
>
> Perhaps I'm just lucky.
>
> Larry Ott - NSRCA 3381
>
> > -----Original Message-----
> > From: discussion-request at nsrca.org
> > [mailto:discussion-request at nsrca.org]On Behalf Of Thomas C. Weedon
> > Sent: Monday, September 09, 2002 2:40 PM
> > To: discussion at nsrca.org
> > Subject: RE: Sheeting the Wings>>>Contact cement
> >
> >
> > I tried contact cement many years ago. It's just fine for a
> > .40 trainer that
> > won't be around long, so stay far away while your friend
> > learns what it is
> > like to re-kit a nice airplane. Too bad, so sad.
> >
> > Tom W.
> >
> > -----Original Message-----
> > From: discussion-request at nsrca.org
> > [mailto:discussion-request at nsrca.org]On Behalf Of Brian Young
> > Sent: Monday, September 09, 2002 3:27 PM
> > To: discussion at nsrca.org
> > Subject: Re: Sheeting the Wings>>>Contact cement
> >
> >
> > A buddy of mine just sheeted the wings on his Carden
> > 30% 330 w/ contact cement. I cringed when he said
> > that. Anyone try this recently, just wonder if I want
> > to be around when he flys it.
>
>
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>
>


=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#