What is CABOSIL ??

[Verne Koester]

Bill,
Try Fiberlay.com, CSTSales.com, and Fiberglast.com. Seems I saw where Bolly was packaging the stuff as well. FalconHobbies.com distributes the Bolly stuff.

Verne


  ----- Original Message ----- 
  From: Bill Glaze 
  To: discussion at nsrca.org 
  Sent: Friday, September 06, 2002 10:42 AM
  Subject: Re: What is CABOSIL ??


  Verne: 
  I came in on this thread late.  Where do you get Cabosil?  It sounds like something I could use for a current repair on a glass fuselage.  Thanks. 
  Bill Glaze 
  Verne Koester wrote: 

    Cabosil is fumed silica sand. It's extremely light weight. When mixed with epoxy finishing resin, it creates a paste that won't run on vertical surfaces. It's also frequently mixed with epoxy in a thinner mix and brushed into a mold to create the external gel coat on a glass part which prevents pinholes from making it to the surface of a part. On a clear epoxy-cloth piece, the epoxy/cabosil mix can be seen in all the 90-degree corners to bridge the radius the cloth can't make. It'll show as an opaque white as opposed to the clear epoxy/cloth you see everywhere else. Down side is that it's much tougher to sand than micro-balloons and has virtually no structural strength. Good stuff to have around, though. I use it a lot. Verne   
      ----- Original Message -----
      From: Van - E-Mail LIST
      To: Pattern LIST
      Sent: Thursday, September 05, 2002 8:32 PM
      Subject: What is CABOSIL ??
       Don't think I know what this is ?________________________________________________ Van Flowers 
      AMA: 6216 IMAC: 2229 
      IMAA: 26019 NSRCA: 2778 
      www.rc-aerobatics.com    
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20020906/0a58559b/attachment.html