venus 40

[Bob Pastorello]

Wow.
I have never had one, but I believe it would CERTAINLY have more power than my OS 70 Surpass II, and I have unlimited vertical now.  5lb 7oz, all up....I used HEAVY GMS servos all round, could have saved a couple ounces there.  But I have NO complaints with vertical.

The YS sounds like it would have all you need.

Bob Pastorello
NSRCA 199, AMA 46373
rcaerobob at cox.net
www.rcaerobats.net


  ----- Original Message ----- 
  From: Wade & Barbara Akle 
  To: Discussion rc NSRCA 
  Sent: Saturday, October 26, 2002 7:54 AM
  Subject: Re: venus 40


  Bob, How do you think the YS63 would match/perform in the Venus?
  Wade

    ----- Original Message -----
    From: Bob Pastorello
    Sent: Saturday, October 26, 2002 3:27 AM
    To: discussion at nsrca.org
    Subject: Re: venus 40

    Only by severe carving of the cowl.  It is pretty narrow, and looks almost
    like they designed the recess at the bottom for a rear exhaust 70- 4 stroke
    or 46 -2 stroke (is there such an animal???)

    I just used the stock OS muffler, hangin out the left side and angled
    downward.  Puts the exhause right above the landing gear leg, yet under the
    wing....actually works out to be pretty clean.

    Bob Pastorello
    NSRCA 199, AMA 46373
    rcaerobob at cox.net
    www.rcaerobats.net


    ----- Original Message -----
    From: "John Crozier" <sjcrozier at comcast.net>
    To: "nsrca discussion" <discussion at nsrca.org>
    Sent: Saturday, October 26, 2002 12:04 AM
    Subject: venus 40


    > what are you guys using to power your Venus 40?
    > Is it do-able to mount the engine in the 8o'clock position so the muffler
    > hangs out the bottom?
    >
    > =====================================
    > # To be removed from this list, send a message to
    > # discussion-request at nsrca.org
    > # and put leave discussion on the first line of the body.
    > #
    >

    =====================================
    # To be removed from this list, send a message to 
    # discussion-request at nsrca.org
    # and put leave discussion on the first line of the body.
    #
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20021026/2e39aa1d/attachment.html