venus 40

[John Crozier]

Thanx, Bob. I was considering sticking a OS61FX in one. Did you use a split
ele. pushrod and pull-pull rudder?
Is there a problem setting the tank at the proper height?
Does it come with wheels?
So many questions, so little money.....croz
----- Original Message -----
From: "Bob Pastorello" <rcaerobob at cox.net>
To: <discussion at nsrca.org>
Sent: Saturday, October 26, 2002 4:26 AM
Subject: Re: venus 40


> Only by severe carving of the cowl.  It is pretty narrow, and looks almost
> like they designed the recess at the bottom for a rear exhaust 70- 4
stroke
> or 46 -2 stroke (is there such an animal???)
>
> I just used the stock OS muffler, hangin out the left side and angled
> downward.  Puts the exhause right above the landing gear leg, yet under
the
> wing....actually works out to be pretty clean.
>
> Bob Pastorello
> NSRCA 199, AMA 46373
> rcaerobob at cox.net
> www.rcaerobats.net
>
>
> ----- Original Message -----
> From: "John Crozier" <sjcrozier at comcast.net>
> To: "nsrca discussion" <discussion at nsrca.org>
> Sent: Saturday, October 26, 2002 12:04 AM
> Subject: venus 40
>
>
> > what are you guys using to power your Venus 40?
> > Is it do-able to mount the engine in the 8o'clock position so the
muffler
> > hangs out the bottom?
> >
> > =====================================
> > # To be removed from this list, send a message to
> > # discussion-request at nsrca.org
> > # and put leave discussion on the first line of the body.
> > #
> >
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#