Plugs
Bill Glaze
billglaze at triad.rr.com
Fri Oct 25 13:19:29 AKDT 2002
All:
I was surprised to find out a day or so ago, that the local Radio Shack
no longer has the plugs used to make power cords for my Litco charger.
They now have plugs that are 90 degree, 2 piece, which are (surprise!!)
much more expensive than the older plugs with the black Bakelite shield.
While these new plugs seem to offer an easier out for soldering, (they
have 2 wire leads) they also have the possibility of an easy done
accidental polarity reversal.
Anybody else had this problem recently? As cheap as the former plugs
were, if one could master the trick of small part soldering, they worked
well.
Just an advisory: If your Radio Shack has any of the older plugs, I'd
sure buy them all up before some Hoarder gets them! (If you like them
as much as I do.)
Bill Glaze
=====================================
# To be removed from this list, send a message to
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#
More information about the NSRCA-discussion
mailing list