Tuned pipe differences 120 4c & 145 Webra 2c
glenn hatfield
randy10926 at comcast.net
Thu Oct 24 06:36:23 AKDT 2002
I have both of these engines. The OS 120 Surpass II that I have has a
side exhast with threaded port. The Webra is a rear exhast with a bolt
on header. I see no way that the same header can be used.
I have my OS120 Surpass II in a Swallow90 also. I am running the stock
OS muffler for this engine. It is quiet enough. Maybe you should try
the stock muffler before you spend money on a pipe.
Randy Hatfield
AMA 453495
NSCRA 2422
----- Original Message -----
From: Tim Seyfarth <TJS at mail.global-electronics.com>
Date: Wednesday, October 23, 2002 10:26 pm
Subject: Tuned pipe differences 120 4c & 145 Webra 2c
> I am returning to pattern with a swallow to start powered by an OS
> 120 4
> cycle which I already have and want to get a pipe for it.
> However, my
> larger plan is to get a Webra 1.45 in the near future for a full blown
> 2meter ship. Being on a bit of a budget I was hoping I could get
> a pipe
> that would work on either.Is this possible and does anyone have any
> recommendations? I was pondering a Macs for the price...
>
> Thanks
> Tim
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>
>
=====================================
# To be removed from this list, send a message to
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#
More information about the NSRCA-discussion
mailing list