Aresti 40

[Bob Miller]

Had all three and I would put it at the bottom in preference.  However, I
had a 60 in it and it was both heavy and fast.  You have to stay on it with
this high wing loading or it will snap and spin if you get a little too
slow.  Would definitely go with a light engine, if I was to do it again.

Bob Miller
----- Original Message -----
From: "John Ferrell" <johnferrell at earthlink.net>
To: <discussion at nsrca.org>
Sent: Thursday, October 03, 2002 10:56 AM
Subject: Re: Aresti 40


> Anyone care to compare it to a Kaos or Dirty Birdy? It does not take a
> Pattern Pro to produce a good flying model from one of these kits and
there
> are a lot of modelers out there that are willing to build for a fair
price!
>
> I saw the same airplane that Bill Glaze referred to and I could NOT
> recommend it to a new pattern flyer.
>
> John Ferrell
> 6241 Phillippi Rd
> Julian NC 27283
> Phone: (336)685-9606
> Dixie Competition Products
> NSRCA 479 AMA 4190  W8CCW
> "My Competition is Not My Enemy"
>
>
>
> ----- Original Message -----
> From: "ronlock" <ronlock at comcast.net>
> To: <discussion at nsrca.org>
> Sent: Wednesday, October 02, 2002 9:50 PM
> Subject: Re: Aresti 40
>
>
> > Ive helped a buddy get one going.
> > Uses an OS .50 with a "black mac muffler/pipe.
> > Pretty good combination.   I don't think a .60
> > would be an overall improvement.
> >
> > Someone else mentioned they are a bit heavy and fast.
> > Well... that's kind of true.   But I don't know of an
> > under $200 ARF that's better in those respects.
> >
> > Ron lockhart
> > ----- Original Message -----
> > From: "Larry Diamond" <jed241 at email.msn.com>
> > To: "NSRCA List" <discussion at nsrca.org>
> > Sent: Wednesday, October 02, 2002 12:11 AM
> > Subject: Aresti 40
> >
> >
> > > Anyone have experience with the Hanger 9 Aresti 40?
> > >
> > > The kit calls for a 58 2-Stroke...The MDS 58 is 19.48oz w/ muffler. A
60
> > > size OS or ST engine seems a bit overkill and about 5 to 6 ounces
> heavier,
> > > but I could be wrong...
> > >
> > > What engine is recommended? I have no experience with the MDS...Don't
> want
> > a
> > > 4-Stroke...
> > >
> > > Any tips on building? I did read the article in the September RCM.
> > >
> > > Larry
> > > jed241 at msn.com
> > > NSRCA 3083
> > > AMA 5024
> > >
> > >
> > > =====================================
> > > # To be removed from this list, send a message to
> > > # discussion-request at nsrca.org
> > > # and put leave discussion on the first line of the body.
> > > #
> > >
> > >
> >
> >
> > =====================================
> > # To be removed from this list, send a message to
> > # discussion-request at nsrca.org
> > # and put leave discussion on the first line of the body.
> > #
> >
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#