Aresti 40
John Ferrell
johnferrell at earthlink.net
Thu Oct 3 07:56:06 AKDT 2002
Anyone care to compare it to a Kaos or Dirty Birdy? It does not take a
Pattern Pro to produce a good flying model from one of these kits and there
are a lot of modelers out there that are willing to build for a fair price!
I saw the same airplane that Bill Glaze referred to and I could NOT
recommend it to a new pattern flyer.
John Ferrell
6241 Phillippi Rd
Julian NC 27283
Phone: (336)685-9606
Dixie Competition Products
NSRCA 479 AMA 4190 W8CCW
"My Competition is Not My Enemy"
----- Original Message -----
From: "ronlock" <ronlock at comcast.net>
To: <discussion at nsrca.org>
Sent: Wednesday, October 02, 2002 9:50 PM
Subject: Re: Aresti 40
> Ive helped a buddy get one going.
> Uses an OS .50 with a "black mac muffler/pipe.
> Pretty good combination. I don't think a .60
> would be an overall improvement.
>
> Someone else mentioned they are a bit heavy and fast.
> Well... that's kind of true. But I don't know of an
> under $200 ARF that's better in those respects.
>
> Ron lockhart
> ----- Original Message -----
> From: "Larry Diamond" <jed241 at email.msn.com>
> To: "NSRCA List" <discussion at nsrca.org>
> Sent: Wednesday, October 02, 2002 12:11 AM
> Subject: Aresti 40
>
>
> > Anyone have experience with the Hanger 9 Aresti 40?
> >
> > The kit calls for a 58 2-Stroke...The MDS 58 is 19.48oz w/ muffler. A 60
> > size OS or ST engine seems a bit overkill and about 5 to 6 ounces
heavier,
> > but I could be wrong...
> >
> > What engine is recommended? I have no experience with the MDS...Don't
want
> a
> > 4-Stroke...
> >
> > Any tips on building? I did read the article in the September RCM.
> >
> > Larry
> > jed241 at msn.com
> > NSRCA 3083
> > AMA 5024
> >
> >
> > =====================================
> > # To be removed from this list, send a message to
> > # discussion-request at nsrca.org
> > # and put leave discussion on the first line of the body.
> > #
> >
> >
>
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>
=====================================
# To be removed from this list, send a message to
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#
More information about the NSRCA-discussion
mailing list