Kavan Starter cone

[John Crozier]

Ihncheol,
I use no glue. The small hole in the soft cone fits just a little way (maybe
1/2 inch) onto the tip of the T.T. FAI spinner.
I had the sameproblem of the cone hanging on the spinner when using the
large diameter opening.
....croz
----- Original Message -----
From: "Ihncheol Park" <PatternFlyer at msn.com>
To: <discussion at nsrca.org>
Sent: Sunday, November 03, 2002 5:34 PM
Subject: RE: Kavan Starter cone


> John,
> Did you glue the soft cone to the starter?
> I tried both front and back holes on TT spinners.  the cone stuck to the
> spinner when I pull the starter back.
>
> -----Original Message-----
> From: discussion-request at nsrca.org
> [mailto:discussion-request at nsrca.org]On Behalf Of John Crozier
> Sent: Saturday, November 02, 2002 7:50 PM
> To: discussion at nsrca.org
> Subject: Re: Kavan Starter cone
>
>
> I use the small hole  in the soft cone for my Webea Aero X ...croz
> ----- Original Message -----
> From: "Ihncheol Park" <PatternFlyer at msn.com>
> To: "NSRCA" <discussion at nsrca.org>
> Cc: "Pattern-list" <pattern at rcmailinglists.com>
> Sent: Saturday, November 02, 2002 9:36 PM
> Subject: Kavan Starter cone
>
>
> > Hi, All,
> > Do you people use Soft starter rubber or regular that comes with the
> > starter?  I tried Soft rubber from Central Hobbies because the regular
one
> > grind my plastic spinner. If I use the soft on my TT spinners, it sticks
> on
> > the spinner cone.  Should I glue it?  The regular rubber skid on the
> > aluminum spinners.
> >
> > Ihncheol Park
> > 1973 White Ave., #402
> > Moscow, ID 83843
> > (208) 883-7882 Home
> > (208) 661-5018 Cellular
> > PatternFlyer at msn.com
> >
> > =====================================
> > # To be removed from this list, send a message to
> > # discussion-request at nsrca.org
> > # and put leave discussion on the first line of the body.
> > #
> >
> >
>
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>
>
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>
>


=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#